quick question...need quick answer
+ Reply to Thread
Results 1 to 10 of 10

This is a discussion on quick question...need quick answer within the General Maintenance, Troubleshooting & Accidents. forums, part of the Tech & Modifying & General Repairs category; what size bolt would go in place of the EGT sensor on a stock uppipe. someone please respond quickly thanks...

  1. #1
    Registered User
    Join Date
    Jun 2005
    Location
    ct
    Posts
    607

    quick question...need quick answer

    what size bolt would go in place of the EGT sensor on a stock uppipe.

    someone please respond quickly thanks
    vf22 Stage IIII wagon of DOOM

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User blarg's Avatar
    Join Date
    Mar 2002
    Location
    Calmer than you are
    Posts
    10,366
    IIRC, its 1/8" NPT, although I would highly recommend waiting for confirmation...I could be wrong.
    ScoobyDMC #009 - making dirty jokes since before you were making dirty diapers.
    Quote Originally Posted by Blarg
    go f*** yourself

  4. #3
    Registered User
    Join Date
    Jun 2005
    Location
    ct
    Posts
    607
    Quote Originally Posted by blarg
    IIRC, its 1/8" NPT, although I would highly recommend waiting for confirmation...I could be wrong.

    what dose that mean in english

    im just looking for a MM size for the bolt. just a regualr old bolt
    vf22 Stage IIII wagon of DOOM

  5. #4
    Registered User blarg's Avatar
    Join Date
    Mar 2002
    Location
    Calmer than you are
    Posts
    10,366
    1/8" NPT = 1/8" National Pipe Thread. It specifies the thread pitch.

    I believe the metric equivalent is M12x1.25
    ScoobyDMC #009 - making dirty jokes since before you were making dirty diapers.
    Quote Originally Posted by Blarg
    go f*** yourself

  6. #5
    Registered User
    Join Date
    Jun 2005
    Location
    ct
    Posts
    607
    Quote Originally Posted by blarg
    1/8" NPT = 1/8" National Pipe Thread. It specifies the thread pitch.

    I believe the metric equivalent is M12x1.25

    i tried a 14mm bolt in there...one of them from a downpipe/uppipe too see if it would fit. but it was too small.

    i dont know what that 14MM bolt would be like in comparison to this M12x1.25
    vf22 Stage IIII wagon of DOOM

  7. #6
    Registered User blarg's Avatar
    Join Date
    Mar 2002
    Location
    Calmer than you are
    Posts
    10,366
    Quote Originally Posted by rbwrx
    i tried a 14mm bolt in there...one of them from a downpipe/uppipe too see if it would fit. but it was too small.

    i dont know what that 14MM bolt would be like in comparison to this M12x1.25
    that's NOT a 14mm BOLT...its actually an 8mm bolt with a 14mm BOLT HEAD you n00b.
    ScoobyDMC #009 - making dirty jokes since before you were making dirty diapers.
    Quote Originally Posted by Blarg
    go f*** yourself

  8. #7
    Registered User
    Join Date
    Jun 2005
    Location
    ct
    Posts
    607
    Quote Originally Posted by blarg
    that's NOT a 14mm BOLT...its actually an 8mm bolt with a 14mm BOLT HEAD you n00b.

    haha...thats how a measure it. i dont know all that technical stuff about the bolts....thats why your here

    so that M12x1.25 would be a 12MM bolt?
    vf22 Stage IIII wagon of DOOM

  9. #8
    Registered User blarg's Avatar
    Join Date
    Mar 2002
    Location
    Calmer than you are
    Posts
    10,366
    Quote Originally Posted by rbwrx
    haha...thats how a measure it. i dont know all that technical stuff about the bolts....thats why your here

    so that M12x1.25 would be a 12MM bolt?
    12mm bolt shaft, 1.25 thread pitch, and I don't know what size the bolt head will be..that usually not not mentioned.
    ScoobyDMC #009 - making dirty jokes since before you were making dirty diapers.
    Quote Originally Posted by Blarg
    go f*** yourself

  10. #9
    Registered User
    Join Date
    Jun 2005
    Location
    ct
    Posts
    607
    Quote Originally Posted by blarg
    12mm bolt shaft, 1.25 thread pitch, and I don't know what size the bolt head will be..that usually not not mentioned.

    thanks blarg. the 12m x 1.25 was the right size
    vf22 Stage IIII wagon of DOOM

  11. #10
    Registered User blarg's Avatar
    Join Date
    Mar 2002
    Location
    Calmer than you are
    Posts
    10,366
    ScoobyDMC #009 - making dirty jokes since before you were making dirty diapers.
    Quote Originally Posted by Blarg
    go f*** yourself

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.
If you do not want to register, fill this field only and the name will be used as user name for your post.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself. We strongly suggest that you stay away from using aol, yahoo, msn, and hotmail accounts. Sometimes the mail server blocks the emails from our server. As a result you will not receive any notifications including the confirmation email.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.


Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •