Subaru WRX Forum banner

replacing radiator hoses

1K views 1 reply 2 participants last post by  wrx wagone 
#1 ·
Im upgrading to Perrin radiator hoses. Any tips/advice/how to info?

what type of coolant do you reccommend i refill the system with?
 
#2 ·
1. Drain radiator

2. Disconnect hoses

3. Connect new hoses.

4. Refill radiator

5. Close radiator cap and open cap over the turbo

6. Start engine and wait until it gets hot

7. Watch little bubbles come up and refill when coolant level lowers

8. When this tapers off, close cap

9. Have a beer, or I guess in your case a root beer

:)
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top