Today I installed a TurboXS FMIC and TurboXS short ram intake on my 02 sedan, and after we finished it i went to crank the car up and it cranked up for one second then quickly bogged and cut off. It does this every time i crank the car up now. If i hold the gas while it is cranked it bogs to about 200rpms and stays there trying to cut off. I checked the MAF and double checked to make sure all hoses and clamps were secure and tight. I dont know what it could be. Would it be because im not tuned for it? if it is im getting tuned Wed. so that would solve it. I already searched on it and read some stickies but i found nothing. Hope you all can help. thanks in advance.