First off 2005 STI Stage 2 CObb AP, turboback, cold a/i
Car just all of a sudden had trouble starting today. Some times it would do a grinding noise and other times it would just be blank and then some times it would start. Car then threw a blinking CEL and I checked them with my AP and it threw six different codes.
P1518 P0852 P1153 P1152 P0502 P05032
One more thing I noticed is the hot cold thing usually sits at the first line after it's all the way warmed up. When i was driving it was moving all the way up to the second one but no higher than that.
Any help would be great!
Update: So i read through some post similar to mine and they were talking about these green test connectors that shouldn't be plugged in. So i look under the steering wheel and low and behold these freaking things are plugged in. I unplugged them and put the key in the ignition and turned it to the on position, the CEL isn't blinking anymore. Now how the heck did these things get plugged in? I haven't had my car worked on in over half a year. I guess tomorrow I will see if I still have a problem starting the car. Maybe the ignition switch is going bad.