Downpipe bracket broke.
Results 1 to 2 of 2

This is a discussion on Downpipe bracket broke. within the General Maintenance, Troubleshooting & Accidents. forums, part of the Tech & Modifying & General Repairs category; I bought a downpipe used and have run it for quite a while now. It started squeaking a while back ...

  1. #1
    Registered User jeremydingeman's Avatar
    Join Date
    Mar 2012
    Location
    Bothell, WA
    Posts
    234

    Downpipe bracket broke.

    I bought a downpipe used and have run it for quite a while now. It started squeaking a while back so i got under the car and found that the tab that connects to the j-piece that connects to the transmission had broke. Its totally sheared off. Should i bother getting it fixed/replaced?
    Find a low-mileage one-owner unmodified '04/'05 and you're golden.

    Understeer is when you hit the wall with the front of the car.
    Oversteer is when you hit the wall with the rear of the car.
    Horsepower is how fast you hit the wall.
    Torque is how far you take the wall with you.

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User Ruh Roh's Avatar
    Join Date
    Dec 2011
    Location
    Pottstown PA
    Posts
    3,233
    mines broken off right where the bend on the downpipe is. my aftermarket downpipe doesnt have a mount there anyway so its fine.
    Marky Mark
    2002 Stage 2.3 PSM Bugeye tuned by Matty at WTFtuning
    Bugeye Mafia #397, High Mileage Club, WTF Tuning Intern
    My bugeye build
    MinoskePhotography
    First Mods and other useful info!
    GM EBCS/ Hallman MBC Hybrid boost setup diagram

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •