Sorry but what are you asking? You'll have to locate the leak and fix it.
This is a discussion on front mount installed now leaks within the General Maintenance, Troubleshooting & Accidents. forums, part of the Tech & Modifying & General Repairs category; ok so i have an 02 wrx i just installed a tda motorsports front mount kit. now when i drive ...
ok so i have an 02 wrx i just installed a tda motorsports front mount kit. now when i drive it and it starts to boost it leaks. it sounds like a whining noise. but this isnt really the big problem, sometimes like if its not under high boost it doesnt even blow off. any help would b greatly appreciated
Sorry but what are you asking? You'll have to locate the leak and fix it.
WRX Info Links, Courtesy TheJ
I'm mixing the barley with the grape again. Rory Gallagher
Själen är större än världen. Ricky Bruch
Let the liquor do the thinking. Jim Lahey
DISCLAIMER: Opinions expressed are the author's alone and are inherently worthless.
im asking why would it not blow off and if there is a good place to start looking for the leak
Because there is no pressure to blow off.
It doesn't matter in terms of that - your turbo is spinning much more than it needs to or can sustain.
You can buy a boost leak tester on ebay, and I recommend it, but you need to read up and be careful (loosen the oil filler cap). You can make things much worse with one if you blow a seal.
"From a little spark may burst a mighty flame." - Dante
"The stitch is lost unless the thread is knotted." - Italian proverb
Bookmarks