Look on top of the motor toward the front near the A/C and alternator, on the top of the block.
This is a discussion on P0335 car won't start within the General Maintenance, Troubleshooting & Accidents. forums, part of the Tech & Modifying & General Repairs category; Im getting the crank position sensor code on my 02 wrx The car will not start or crank over I ...
Im getting the crank position sensor code on my 02 wrx
The car will not start or crank over
I bought a replacement sensor, where does it go? If someone could post a diagram or detailed instructions that would be great.
Thanks
Look on top of the motor toward the front near the A/C and alternator, on the top of the block.
WRX Info Links, Courtesy TheJ
I'm mixing the barley with the grape again. Rory Gallagher
Själen är större än världen. Ricky Bruch
Let the liquor do the thinking. Jim Lahey
DISCLAIMER: Opinions expressed are the author's alone and are inherently worthless.
Would I need to remove the alternator to get to the sensor?
I replaced the sensor and my car still won't start. Could it be the starter?
The car won't even crank when I turn the key.
Bookmarks