Results 1 to 6 of 6

This is a discussion on Boost problem within the General Maintenance, Troubleshooting & Accidents. forums, part of the Tech & Modifying & General Repairs category; I have a 04 WRX STi completely stock with 45k km. When i am in 3rd gear and hit 3k ...

  1. #1
    Registered User
    Join Date
    Apr 2010
    Posts
    28

    Boost problem

    *Registered users who are signed in do not see this ad.
    Please sign in or register for free!

    I have a 04 WRX STi completely stock with 45k km. When i am in 3rd gear and hit 3k rpm the the turbo kicks in and rev meter quickly boosts to 5k rpm unexpectidly and jerks their a while. Anyone know why this is happening? It never use to happen before. In all the other gears the revs go up constantly at the same speed.

  2. #2
    He simply abides. SD_GR's Avatar
    Join Date
    Jul 2002
    Location
    CA, US
    Posts
    20,370
    I Support ClubWRX
    Could be a slipping clutch I suppose. On very open road, put it in 6th at low RPM and floor the throttle. If the tach needle jumps but the car does not accelerate, shop for a replacement clutch.
    WRX Info Links, Courtesy TheJ
    I'm mixing the barley with the grape again. Rory Gallagher
    Själen är större än världen. Ricky Bruch
    Let the liquor do the thinking. Jim Lahey
    DISCLAIMER: Opinions expressed are the author's alone and are inherently worthless.

  3. #3
    Registered User
    Join Date
    Apr 2010
    Posts
    28
    do you reccomend the sti clutch or another brand?

  4. #4
    Registered User
    Join Date
    Jun 2010
    Posts
    10
    Quote Originally Posted by queenstown3 View Post
    do you reccomend the sti clutch or another brand?
    If it has the 5 speed in it still, just use a Standard EXEDY clutch kit, make sure you machine the flywheel and install a new spiggot bearing.

    I DO NOT recommend putting any kind of Heavy Duty clutch behind the stock 5spd trans.

    Hope that helps you out,.

  5. #5
    UnBanned Sinister's Avatar
    Join Date
    Nov 2006
    Location
    Denver Metro Area
    Posts
    16,984
    I Support ClubWRX
    Quote Originally Posted by Bugeyez View Post
    If it has the 5 speed in it still, just use a Standard EXEDY clutch kit, make sure you machine the flywheel and install a new spiggot bearing.

    I DO NOT recommend putting any kind of Heavy Duty clutch behind the stock 5spd trans.

    Hope that helps you out,.
    Read above. It's an 04 STi.

  6. #6
    UnBanned Sinister's Avatar
    Join Date
    Nov 2006
    Location
    Denver Metro Area
    Posts
    16,984
    I Support ClubWRX
    Quote Originally Posted by queenstown3 View Post
    do you reccomend the sti clutch or another brand?
    upgrade your clutch. I like my ACT. That's up to you. Use a full face organic clutch. (DON'T GET PUCKS, Ceramic/Kevlar, etc)

    And don't resurface your flywheel. Subaru flywheels are disposable and not meant to be resurfaced.

    Your new clutch will come with a throwout bearing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •