clutch master cylinder?
Results 1 to 4 of 4

This is a discussion on clutch master cylinder? within the General Maintenance, Troubleshooting & Accidents. forums, part of the Tech & Modifying & General Repairs category; so today i drained my clutch fluid and put fresh in but as i was bleeding it i noticed after ...

  1. #1
    Registered User wrxwagn123's Avatar
    Join Date
    Mar 2010
    Location
    wisconsin
    Posts
    125

    clutch master cylinder?

    so today i drained my clutch fluid and put fresh in but as i was bleeding it i noticed after like 10 minutes that it was not pressurizing im pretty sure the mast cylinder is clogged? do i have to buy a new one or...?

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User
    Join Date
    Mar 2010
    Location
    Woodland Park, CO
    Posts
    34
    From my experience, clutches are a PITA to bleed once you get air into them. Keep at it. If you have a pressurized bleeder (like the Motiv) that helps, but even then, it can take a bit to get the air out.

  4. #3
    Registered User wrxwagn123's Avatar
    Join Date
    Mar 2010
    Location
    wisconsin
    Posts
    125
    Quote Originally Posted by Matt314 View Post
    From my experience, clutches are a PITA to bleed once you get air into them. Keep at it. If you have a pressurized bleeder (like the Motiv) that helps, but even then, it can take a bit to get the air out.
    trust me i did that for a while, my friend even had the vacuum bleader

  5. #4
    Moderator Donkey's Avatar
    Join Date
    Apr 2005
    Location
    Da boonies
    Posts
    5,994
    I Support ClubWRX
    On the WRX's its just the way they are. Mine was the same.
    Resident Adviser @ WTF Tuning, LLC
    2002 FORESTER S
    1998 FORESTER S




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •