cobb accessport troubleshoot
Results 1 to 3 of 3

This is a discussion on cobb accessport troubleshoot within the General Maintenance, Troubleshooting & Accidents. forums, part of the Tech & Modifying & General Repairs category; i went to install accessport in 2006 wrx and found the test mode connector was already connected and the unit ...

  1. #1
    Registered User
    Join Date
    Aug 2008
    Posts
    4

    cobb accessport troubleshoot

    i went to install accessport in 2006 wrx and found the test mode connector was already connected and the unit wont install my map. what am i missing. i swear im not retarded

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User JUSTINSNUTSWINGER's Avatar
    Join Date
    Jul 2008
    Location
    San Antonio
    Posts
    1,923
    Start over. Unplag the connectors and turn the car off and then restart everything. Weird they were connected. Sure you are lookin at the right plugs??

  4. #3
    Registered User
    Join Date
    Jan 2005
    Location
    Canada B.C.
    Posts
    1,393
    There are two sets of those plugs, one under the dash is where you usually need to plug together and one set on the passenger side kick panel that is supposed to be already plugged in, that is probably the one you need to find and plug together...
    '02 WRX 4EAT, 311,000KMs/194,500Miles, Sold. Best car I ever had. '09 STi stage 1, hope this one will be good too...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •