This is a discussion on How do I remove the rear subaru badge from a 2012 wrx hatch? within the Exterior & Appearance forums, part of the Tech & Modifying & General Repairs category; Hey guys, I just got a 2012 red wrx hatchback and the rear Subaru badge on the trunk lid is ...
Im not sure but im guessing its just some double sided tape. This ebay listing may help give you an idea
2008 2013 Subaru Impreza Rear Liftgate Trunk Star Emblem Decal New Genuine | eBay
You can always go with a vinyl overlay if you are nervous. I like how you call it a hatch instead of a wagon.
other ebay posts seem to also have double sided tape but different holes.
A bunch of Goo Gone, some fishing wire or floss and some heat (hair dryer) would help
Last edited by cflip2x; 02-03-2014 at 09:11 PM.
2012 WRB 4DR | SPT Exhaust | Cobb Short Throw | Rally Armour | WC Lathe Werks Custom TI Knob | Kartboy Bushings | Stoptech Pads & Brake Lines | JBK Elements DRL | STI HID Retrofit | XB LED Angel Eyes | GrimmSpeed Lightweight Crank Pulley | Perrin Cold Air Intake
CFLip2x 2012 WRB WRX Build
Some suture or dental floss will cut the adhesive without damaging paint. If there are pins with grommets that will require some more work. The plastic 1/2" wide straps they use to bound boxes like heavy car parts (such as struts) or available in any large company that has a shipping department works well to slip behind it and gives you something to pull on instead of taking a screwdriver to it.
Sent from my SM-N900V using Tapatalk
I would recommend the vinyl overlay route as well. That way if you get tired or want to switch it numerous times it is super cheap. By the way, that specific badge is not just stuck on with tape. It is actually attached to the vehicle and if removed would leave a hole in your trunk (I know you are planning on replacing, but I just wanted to mention that. I was originally going to remove mine completely until I discovered that).
Don't click that ---> http://www.clubwrx.net/forums/member...1-obp-sti.html
Thanks for the help guys. I'll probably go with the vinyls overlay route because that seems like the easiest way to switch them to different colors. Thanks again
How do you like the car?
Sent from my iPhone using Tapatalk