Alright, here are the steps!
1. Jack the front of the car up and put on stands. (will give you more room to work)
2.Clean the bottom lip of bumper to allow the 3m to stick better. Make sure its dry.
3.Apply the 3m tape to bumper and follow body lines. Cutting the tape and placing on bumper piece by piece will make sure you dont have wrinkles.
4. Take off top layer of tape.
5.Take your time as you attach the liner to the tape, press and seal as you go.
6. After adjusting the liner, place 4 screws in bumper. 1 on each edge and 1 at each inner curve.
7. lower car
8. Don't wash right away
And... You're done!
Front Lip under $20