rare CUSCO parts we have IN STOCK

**PRE-Erich** · 02-04-2010 01:52 PM

Performance Race Engineering Online - Home

As anyone who has tried to order CUSCO parts lately can tell you, stock in the USA is EXTREMELY LIMITED!
Many sites say they have product in stock but one phone call will tell you most parts are back-ordered indefinitely and their prices are out of date.

Fortunately we have been able to pick up a limited number of items and want to let you know what we have on our shelf ready to ship or pick up.

gdb specific oil catch tank - $127
product link

Cusco's vehicle specific oil catch can is polished to a mirror finish with Cusco blue fittings and bracket, this kit is attractive and functional. The easy to read oil level indicator doubles as the drain tube, just use the quick disconnect fittings and drain the can. It bolts on in minutes using normal hand tools. *Note: This ROUND 15mm oil catch can is vehicle specific for a WRX or STi with a 0.3L oil capacity

Type-RS 1.5 way rear differential - $1328
Special $1300 shipped!
product link

The 1.5-way Type RS utilizes coil springs located between the pressure rings to develop initial torque and features full engagement during acceleration and partial on deceleration. The use of coil springs rather than cone plates help promote faster, smoother engagement, along with higher durability.

Cusco Tarmac Center Gear - $1682
Special $1600 shipped
Club WRX Special - Free GoPro Hero with purchase!
product link

Features:
- Designed for Tarmac rally environments
- Front: 35% - Rear: 65% power distribution
- Strengthened Cusco design
Subaru - Imprezza - GC8 F-G - 09/98-08/00 - Not DCCD
Subaru - Imprezza - GDA

Cusco Type OS Strut Tower Bars - $190
(both front and rear in stock)
Front Bar
Rear Bar

Please note, we ordered all the current US inventory of these bars. Other sites that have them listed probably don't have them in stock and probably can't get them to you.

The most popular of the Cusco bars is the Type OS. The classic design features a tubular aluminum oval shaft with a high polish finish. The end plates are painted the traditional Cusco blue and come with all the required hardware for installation. It bolts on in minutes using normal hand tools.

Cusco OS-T rear triangle bar - $152
product link

This bar allow the rear Type OS to become a 3-point bar by including the floorboard as one of the points. It offers the same style as the Type OS, a tubular aluminum oval shaft with a high polish finish. The Type OS-T bar is an add on to the rear Type OS-T portion. It comes with all the required hardware for installation and holes are required to be drilled in order for the floorboard mount to be attached.

**NOTE: OS-T bar does not include the Rear Strut Bar. Both bars need to be purchased separately in order for this set-up to work. Picture shows OS Rear Strut Bar and OS-T rear triangle bar.

Hyper Single Clutch, Subaru WRX & STi - $1,744.00
Club WRX Special - Free GoPro Hero with purchase!
product link

Featuring a 1280kg/f (2800lb/f) clamping force, this lightweight clutch kit also offers smooth shifting. The Hyper Single Clutch Kit has had the diaphragm lever ratio modified to retain good pedal feel. A high performance clutch, that is capable of holding 400hp and 40kg/f over stock, while retaining good pedal feel, and chromoly flywheel all in one package.

**PRE-Erich** · 02-08-2010 10:24 AM

bump

**PRE-Erich** · 02-10-2010 10:30 AM

bump for exceptionally hard to get stuff!

**PRE-Erich** · 02-12-2010 04:38 PM

bump for the weekend! Treat your sweetie to a nice Valentines day!

**PRE-Erich** · 04-01-2010 02:29 PM

bump for more Cusco parts in stock!

We purchased the ENTIRE US shipment of front and rear wrx/sti strut tower bars from CUSCO! That means that other sites who list them probably can't actually get them to you unless they buy them from us!

**PRE-Erich** · 04-05-2010 10:34 AM

bump for awesome parts in stock!

**PRE-Erich** · 04-08-2010 09:32 AM

bump bump bump

**PRE-Erich** · 04-13-2010 02:24 PM

bump!

**PRE-Erich** · 04-19-2010 11:06 AM

bump

**SeattleJeremy** · 04-19-2010 12:13 PM

Originally Posted by PRE-Erich

**NOTE: OS-T bar does not include the Rear Strut Bar. Both bars need to be purchased separately in order for this set-up to work. Picture shows OS Rear Strut Bar and OS-T rear triangle bar. We do not have the Cusco OS rear strut tower bar in stock but this triangle bar works with the TopSpeed rear strut bar located here**

link is missing