AEM Tru Power pulley kit install help?
Results 1 to 9 of 9

This is a discussion on AEM Tru Power pulley kit install help? within the Engine Performance forums, part of the Tutorials & DIY category; I looked and couldn't find a thread for a pulley kit install. My AEM kit is on its way. Seems ...

  1. #1
    Registered User
    Join Date
    May 2001
    Location
    Olympia, WA
    Posts
    104

    AEM Tru Power pulley kit install help?

    I looked and couldn't find a thread for a pulley kit install. My AEM kit is on its way. Seems simple, but you never know. Any hints, ideas, or suggestions?

    Thanks in advance!
    Platinum sedan with:
    TurboXS Stage II - TurboXS unichip and downpipe and catback, Godspeed uppipe, TurboXS Type H BOV, silencer removed, carbon fiber dash kit (real), H&R springs, 17" Prodrive P1's Anthracite, Foglight mod with no Daytime, and 20% tint

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User Root's Avatar
    Join Date
    May 2001
    Location
    Sacramento, CA
    Posts
    708
    My suggestion........take lots of pictures and post a tutorial to let us see how hard or easy it is.

    Good Luck,
    Justin
    Good judgement comes from experience,
    and experience comes from bad judgement.

  4. #3
    Registered User Jung918's Avatar
    Join Date
    Feb 2002
    Location
    So Kali & Metairie
    Posts
    79
    It took me a day to find this info. It is an ancient chinese secret. Well if it is the crank pulley then put it into 5th gear. It should lock it all up.

  5. #4
    Registered User
    Join Date
    May 2001
    Location
    Olympia, WA
    Posts
    104
    If there are no instructions when I get the kit, I'll try 5th Jung. Thanks.
    Platinum sedan with:
    TurboXS Stage II - TurboXS unichip and downpipe and catback, Godspeed uppipe, TurboXS Type H BOV, silencer removed, carbon fiber dash kit (real), H&R springs, 17" Prodrive P1's Anthracite, Foglight mod with no Daytime, and 20% tint

  6. #5
    Registered User berto's Avatar
    Join Date
    May 2001
    Location
    Irvine
    Posts
    79
    you could download the instruction for the stage 0 and use the part of the pulley install instruction. the instructions are located at http://www.vishnuperformance.com/links.html
    click on the stage 0 word document.
    roberto

  7. #6
    Registered User
    Join Date
    May 2001
    Location
    Olympia, WA
    Posts
    104
    Thanks Berto...now if that kit will ever make it to my door...I'm beginning to think that at $85, I should have just paid the extra $15 to get it ASAP.
    Platinum sedan with:
    TurboXS Stage II - TurboXS unichip and downpipe and catback, Godspeed uppipe, TurboXS Type H BOV, silencer removed, carbon fiber dash kit (real), H&R springs, 17" Prodrive P1's Anthracite, Foglight mod with no Daytime, and 20% tint

  8. #7
    Registered User
    Join Date
    Jul 2003
    Location
    CO
    Posts
    444
    Vishnu Stage 0 Install Instructions

    Look at the section for the underdrive pulley.

  9. #8
    Registered User
    Join Date
    Mar 2003
    Location
    Chandler, AZ
    Posts
    308
    The pulley install is pretty easy. Just pull the E-brake, put it 5th, and have a friend stomp the brake and crank that thing off with a breaker bar.
    Steve McQueen's got nothin' on me...
    I'll take you back, west of Pleiades...

  10. #9
    Registered User 0260B4U's Avatar
    Join Date
    Feb 2003
    Location
    I rule
    Posts
    696
    yeah the alt pulley is the PITA
    --Little John--

    Straights are for fast cars...
    Turns are for fast drivers...
    --Colin McRae

    "Power is nothing without control"

    http://static.howstuffworks.com/gif/engine-flat-4.gif

    "Are you OK to drink?"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •