LinkBack URL
About LinkBacks
Reply With QuoteJust start with a circular wrap near the 02 bung or near the turbo, clamp it with a O-clamp, wind it down to the other end, nip it off, and then clamp it with an O-clamp at that end.
This is a discussion on dp heat wrap install? within the Engine Performance forums, part of the Tutorials & DIY category; i jsut got a dp and a copper heat wrap does anyone konw how to do this, i saw an ...
i jsut got a dp and a copper heat wrap does anyone konw how to do this, i saw an old reg heat wrap install but i cant find it anymore
thanks
Just start with a circular wrap near the 02 bung or near the turbo, clamp it with a O-clamp, wind it down to the other end, nip it off, and then clamp it with an O-clamp at that end.
tEh PriUs=teH faSTah!@@!
SOLD: 05 SWP Legacy GT Limited 5MT, 13.3ish@105 (stage 2) crappy stock clutch
SOLD: 04 MPS/SW WRX Sti. 12.971 @ 103.97 (stock)
278 AWHP/283 AWT, Catback exhaust
306 AWHP/341 AWT, Stage 2
(Scott) Moderator-STi, Drag Racing, Car Purchasing, and Tutorial Forums
Posting Permissions
Bookmarks