Questions with DIY oil catch can
Results 1 to 2 of 2

This is a discussion on Questions with DIY oil catch can within the Engine Performance forums, part of the Tutorials & DIY category; i see 3 lines that go to the intercooler that attach in front. two on mechanics left and 1 on ...

  1. #1
    Registered User
    Join Date
    Nov 2006
    Posts
    6

    Questions with DIY oil catch can

    i see 3 lines that go to the intercooler that attach in front. two on mechanics left and 1 on the right, which of these should oil catch cans be put on, i know on the left that one should go on the line that does not go straight down right after the intercooler, but should one go on the right side or another on the left one? im in the process so any help will be greatly appreciated!!!
    thank you
    Jeff

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User Botat1725's Avatar
    Join Date
    Oct 2005
    Location
    Easton PA
    Posts
    327
    The way that I look at it is that if you trace the rubber hoses, one of them will plug into your turbo inlet hose. Just think of the catch can being placed in between that hose and the 2 other hoses that come from the valves.
    ________________________________________________

    XPT Stage 2

    "Do you smell that? It smells like his clutch."
    "No, it's burnt rice."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •