Samco 9 pieces install guide!
Results 1 to 2 of 2

This is a discussion on Samco 9 pieces install guide! within the Engine Performance forums, part of the Tutorials & DIY category; Picture of Samco 9 pcs Ancillary hoses. You will need to remove TMIC and intake top cover in order to ...

  1. #1
    Registered User WRXreX's Avatar
    Join Date
    Mar 2002
    Location
    NY
    Posts
    997

    Samco 9 pieces install guide!

    Picture of Samco 9 pcs Ancillary hoses. You will need to remove TMIC and intake top cover in order to install all hoses. Hose #6 requires removal of coolant tank.



    Hose #3 (passenger side crank case) ---> you will need to remove intake top cover in order to install one.



    Hose # 5 (connects to nipple off of turbo inlet)


    Hose #6 (coolant bottom hose) --> requires removal of coolant tank.


    Hose #7 (driver side crank case) --> you will need to remove TMIC in order to install one.


    Completed:


    Another angle:



  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User oguitar's Avatar
    Join Date
    Nov 2009
    Location
    Albuquerque, New Mexico, United States
    Posts
    1,021
    Great write up. I was wondering where all those hoses went.
    Life is like riding a bicycle in order to keep your balance you must keep moving.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •