Latest Dyno results... 360/302

[CUBUFF]

How does the XS turbo close off the wastegate? Is it welded shut? Do you have any pictures of your wastegate setup, I see your running the ultimate uppipe, is there any fitment issues or fab work you had to do to get this to work with the turbo mounted in the stock location?

Also having the ej207 in are there any complaints? When are you seeing full boost?

[gfx]

Awesome Midknight

[Timdog1650]

How does the XS turbo close off the wastegate? Is it welded shut? Do you have any pictures of your wastegate setup, I see your running the ultimate uppipe, is there any fitment issues or fab work you had to do to get this to work with the turbo mounted in the stock location?

Also having the ej207 in are there any complaints? When are you seeing full boost?

You can put a couple of well placed welds on the wastegate flapper and it closes off the wastegate on the turbo so you can use the external. The fitment of the UR pipe is like stock, so as long as it clears you downpipe (doesn't clear most bellmouths) then you're fine. As far as the EJ207, they come stock with forged crank, pistons, rods and the heads are larger port with better/more aggressive cams.

~Tim

[MidKnight]

You can put a couple of well placed welds on the wastegate flapper and it closes off the wastegate on the turbo so you can use the external. The fitment of the UR pipe is like stock, so as long as it clears you downpipe (doesn't clear most bellmouths) then you're fine. As far as the EJ207, they come stock with forged crank, pistons, rods and the heads are larger port with better/more aggressive cams.

~Tim

You can just answer for me from now on!

[Timdog1650]

d'oh...sorry

[MJU1983]

Is the dyno the reason the power curves look a lil rough?

[MidKnight]

I think that's just the printout. There's also no smoothing applied (which a lot of places put on). Junior had mentioned something about the jaggedness and timing but I missed what he said exactly...

[MJU1983]

I think that's just the printout. There's also no smoothing applied (which a lot of places put on). Junior had mentioned something about the jaggedness and timing but I missed what he said exactly...

I was just wondering... I havent used that brand of dyno before, but I have used mustang, dynopack and dyno dynamics.

[m r g s r]

Sickk. what turbo you using? and what sized injectors/fuel pump?
Yea, the tial gaskets do suck, but you really don't need it. .
I never ran one with my 35mm gate, but I do have one on my 38mm gate now. .

[Matrix 1193]

Midknight how much did you pay for your dyno time?

[13secwrx]

Not to Hijack but I cant resist..

m r g s r...I bet I can beat you...Midknight tooo.

[Timdog1650]

Not to Hijack but I cant resist..

m r g s r...I bet I can beat you...Midknight tooo.

+1

[m r g s r]

I think he was saying that midknight could beat me too.
It's a joke, I know someone will always be able to beat me, and you too. Sheesh. .

[Timdog1650]

I think he was saying that midknight could beat me too.
It's a joke, I know someone will always be able to beat me, and you too. Sheesh. .

You can't be cocky without someone calling you out though

[m r g s r]

You can't be cocky without someone calling you out though

true.