Subaru WRX Forum banner

Air intake elbow

994 views 4 replies 3 participants last post by  white-lightning 
#1 ·
I have a 2002 wrx and the elbow valve on the air intake male part that connects to the hose broke off. The only people that have a clue of what I'm talking about, which is the dealership. Tell me that I need to buy a whole new air intake for this $15 part. I need the elbow valve that is shorter then 1/8 inches, but my guess is that it's in milliliters because it's a Subaru.
I need help badly!
 
#5 ·
Considering that you have an aftermarket bpv going to the dealer is useless. If it was my car I would replace the aftermarket bpv with a factory bpv. If you are dead set on keeping the current one than it looks like you will need some npt fittings from a hardware store, maybe a 90 elbow and straight barb of appropriate diameter.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top