Stage 2 AFR Question
Results 1 to 3 of 3

This is a discussion on Stage 2 AFR Question within the Engine Modifications forums, part of the Tech & Modifying & General Repairs category; I just tuned my 2011 wrx to stage 2 and I am concerned that it is running too lean at ...

  1. #1
    Registered User VT2011WRX's Avatar
    Join Date
    Jun 2011
    Location
    Burlington, VT
    Posts
    2

    Stage 2 AFR Question

    I just tuned my 2011 wrx to stage 2 and I am concerned that it is running too lean at idle. I have noticed that when I put the clutch in and the engine is idling as I am rolling (at approx 2k rpm), the air fuel ratio is a constant 20.4. As the rpms drop to about 700 the AFR drops to around 14.5 but it pauses at 20.4 for a few seconds before dropping. Is this cause for concern having the AFR so lean? It seems to be ok at other areas from what I can tell. The mods that I have are Cobb SF intake, Invidia catted downpipe, and Nameless Performance muffler delete. I am running the stage 2+ low wastegate OTS map. I am noob when it comes to data logging and monitoring so sorry if this is a dumb question. Any input would be greatly appreciated.

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Moderator Donkey's Avatar
    Join Date
    Apr 2005
    Location
    Da boonies
    Posts
    6,047
    I Support ClubWRX

    Stage 2 AFR Question

    It's completely normal. The engine is not even under any load.


    Sent from my magic banana
    Resident Adviser @ WTF Tuning, LLC
    2002 FORESTER S
    1998 FORESTER S




  4. #3
    Registered User VT2011WRX's Avatar
    Join Date
    Jun 2011
    Location
    Burlington, VT
    Posts
    2
    Awesome, thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •