2011 wrx with pioneer avic x930bt & pac swi-ps problems
Results 1 to 2 of 2

This is a discussion on 2011 wrx with pioneer avic x930bt & pac swi-ps problems within the Electronics/Car Audio forums, part of the Interior Mods category; I swapped out my factory radio to a pioneer avic x930bt. I wanted to retain my factory controls. I had ...

  1. #1
    Registered User
    Join Date
    Feb 2013
    Posts
    14

    2011 wrx with pioneer avic x930bt & pac swi-ps problems

    I swapped out my factory radio to a pioneer avic x930bt. I wanted to retain my factory controls. I had a pac swi-ps left over from my s2000. I was able to program the volume up, source, up/down tracks and pickup/ hang up buttons. For some reason it does not read my volume down nor voice command button. I cannot program those buttons with the module.

    The function on the module works because I can program my factory volume up button to the modules volume down but It does not read the actual volume down button.. Anyone has experienced this as well?

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User
    Join Date
    Apr 2012
    Posts
    10
    I only have experience with the Axxess SWC module.

    Try this link
    ae64.com - Axxess ASWC Interface Installation with Subaru 20-pin Harness

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •