MYY 11 WRX

[SPT2011]

I'm finally kinda finished modding for now so I though I would share my current mods... Spent way to much and I know more is to come!



2011 Subaru Impreza WRX Limited WR Blue Pearl


Optional Equipment:

Int. Illumination Kit - Red
Center Armrest
Pop Equip Group 3b
Dim Mirror & Compass w Homelink
Security Syst Shock Sensor

Aftermarket Equipment:

Cobb Accessport (Stage 2+AEM 93)
Cobb Downpipe
SPT Catback Exhaust
AEM Cold Air Intake
AEM Digital Boost Gauge

Pioneer AVIC-Z120BT
JL Audio 600/1
JL Audio W6v2
JL Audio Wiring
PAC Steering Wheel Controls

Carbon fiber side skirts
Carbon fiber rear aprons
STi Front lip
20% full tint+visor
Red tail light smoked+parking brake
Side markers black

Hella horns+harness
Yellow fog light overlay
Yellow high beam/DRL bulb
O2C painted front+back bumper+horns
LED 3022-xHP4 dome+map 3
LED CWHP15-TAC license place+trunk 3
LED HB4-AHP9 fog 2

Volk Rays 50mm Black Lug Nuts
G2 Custom Color 02C Brake Caliper Paint Kit
Pioneer CD-SB10
Sirius SCC1 SiriusConnect Tuner
KartBoy short shifter + bushings


Next:

H&R Coil overs
WC Lathe Werks Titanium WRX Sphere

3M DI-NOC carbon fiber wrap
Sway bars
Endlinks

Rear view backup camra
Traffic tuner ND-TMC10
Pioneer update CNSD-210FM

Next Performance:

Grimmspeed 3 port EBCS
Fuel Pump walbow 255
Injectors DW 850cc
Process West TMIC or Perrin Performance TMIC
Protune RT Tuning

[tommy_c]

Great list, I haven't seen CF side skirts or the rear aprons on the hatches... any pics? Also where are you in NJ?

[Mike193]

i mite have seen u rollin down the highway one time whil i was in my 2011 STi sedan. im in bergen county, what part are you in?

[rage-wrx]

Carbon Fiber roof?

[SPT2011]

Ill post some pics of the aprons and side skirts soon, there both relatively cheap on ebay. I think the sides were 220 and the aprons 120.


as carbon fiber roof I mean carbon fiber 3M wrap (its only 45$ for 8 square feet). I'm still thinking about that one think it would look good or just a waste of money?

[SPT2011]

I'm all around for work. I go from Newark, NJ to Philadelphia to Atlantic City. Most of the time I'm in Bucks County, PA area. But sometimes all also be in New Brunswick and Huntington Valley, PA.

[tommy_c]

Ill post some pics of the aprons and side skirts soon, there both relatively cheap on ebay. I think the sides were 220 and the aprons 120.


as carbon fiber roof I mean carbon fiber 3M wrap (its only 45$ for 8 square feet). I'm still thinking about that one think it would look good or just a waste of money?

Personally I really like them on white cars with the CF roof. There is something about the contrast of both colors that is super appealing to me. Never seen it on any WRBs so I'm curious to see how yours will look like when you get it done. As far as the wrap goes, I work with a few signage vendors at work and I highly suggest in looking in the 3M Di-Noc series or the 1080s. They come highly recommended by the guys that do professional car wrapping. Not sure if you plan on tackling the job yourself (its an easy enough area to do so) but if you are those are the two I would say to get.

[slitlymodified]

Def post pics of roof when done. I was gunna do mine but decided against it since I have trunk and hood . However I am also going to do the 3m overlay on my mirrors, professional of course and I have to wait because I want the Sti mirrors :P

[lokey]

Sways and endlinks first. As far as bang for the buck, they are near the top of the list. You'll wonder why you didn't do this first after one good curve or turn.

[tommy_c]

Def post pics of roof when done. I was gunna do mine but decided against it since I have trunk and hood . However I am also going to do the 3m overlay on my mirrors, professional of course and I have to wait because I want the Sti mirrors :P

I applied a clear bra on my mirrors and found them to be very easy and doable for anyone's skill level. Keep in mind the vinyl for car covers, etc. are much thinner and more flex to mold. When you apply heat to them you can get the toughest of curves. IMO maybe try it yourself first? The material is fairly inexpensive and from experience I can tell you for a professional to do it you'll be looking for a good chunk of change from your wallet. I rather invest the labor money for some sways and endlinks

[SPT2011]

I was only looking at the 3M di-noc it looks like the best and definitely gotta put the best on our new cars! There is a bunch of ebay brands that sell garbage. IMHO I understand what your saying with the white car contrast but to be honest it looks really good on the WRB because everything on the car is black blue and carbon fiber/gray gun metal wheels. The carbon fiber matches and goes great with the stock wheel color because carbon fiber really looks black/gray so it goes great and matches the black/gray/blue car.. I wish u could see my car in person with all the mods i get a ton of complements on the lip kit it self. And ill post pics as soon as i take them.

[lokey]

Dude, pics!

[SPT2011]

I will soon, when I tried earlier my iPhone pics were to big it wouldn't let me insert.....

Lokey good numbers..... What bolt ons do u have and obviously u have a pro tune correct?

[lokey]

I will soon, when I tried earlier my iPhone pics were to big it wouldn't let me insert.....

Lokey good numbers..... What bolt ons do u have and obviously u have a pro tune correct?

Thanks, bro. Click the link in my sig....I try to keep it up to date.