Hold_Fast's ESP/SM/AutoX/Track build. Because race car. - Page 24
+ Reply to Thread
Page 24 of 24 FirstFirst ... 1415161718192021222324
Results 346 to 357 of 357

This is a discussion on Hold_Fast's ESP/SM/AutoX/Track build. Because race car. within the Builds forums, part of the Tech & Modifying & General Repairs category; Worked on the car all weekend and I pulled one knuckle. (not really) Also got the wilwood brakes ready (new ...

  1. #346
    Registered User Hold_Fast's Avatar
    Join Date
    Mar 2008
    Location
    Philly Burbs
    Posts
    1,450
    Worked on the car all weekend and I pulled one knuckle. (not really)



    Also got the wilwood brakes ready (new lines on, calipers hanging waiting for the sedan knuckles), got all 4 axle nuts off, and pulled the back seat to unclip the rear ABS sensors, since they are pretty much rusted onto the knuckles.

    Going to pick up the sedan knuckles from AZP installs tomorrow. If I get the other ones pulled off the car and have the sedan knuckles on by the weekend, I'll be a happy camper. Then I can start the fit up of the Karlton flares this weekend.
    ~Stan
    '04 WRB WRX Wagon (Build) - Hard Parked, AutoX Toy
    '08 WRX ~ Daily Beaten ~ '86 BMW 325es ~ "The Chump"

    "I was raised knowing there is a replacement for displacement, it's called engineering."

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #347
    Registered User Hold_Fast's Avatar
    Join Date
    Mar 2008
    Location
    Philly Burbs
    Posts
    1,450
    Nekro bump. It's been a while, things are a changing. Sneak peak:

    ~Stan
    '04 WRB WRX Wagon (Build) - Hard Parked, AutoX Toy
    '08 WRX ~ Daily Beaten ~ '86 BMW 325es ~ "The Chump"

    "I was raised knowing there is a replacement for displacement, it's called engineering."

  4. #348
    Registered User Ruh Roh's Avatar
    Join Date
    Dec 2011
    Location
    Pottstown PA
    Posts
    3,279
    much wanttt^^^
    Marky Mark
    2002 Stage 2.3 PSM Bugeye tuned by Matty at WTFtuning
    Bugeye Mafia #397, High Mileage Club, WTF Tuning Intern
    My bugeye build
    MinoskePhotography
    First Mods and other useful info!
    GM EBCS/ Hallman MBC Hybrid boost setup diagram

  5. #349
    Registered User Heide264's Avatar
    Join Date
    May 2010
    Location
    Pittsburgh, PA
    Posts
    4,226
    I Support ClubWRX
    Nice!!!
    Quote Originally Posted by Trainrex
    He was throwing balloons filled with sulfuric acid and shrapnel at the swat team. They finally had to take him down with rubber bullets.
    2011 STi Build Log
    -Part 1 - Reading, Data Logging, and Analyzing Data
    -Part 2 - Turbocharger 101 & Basic Boost Control
    -Part 3 - EcuFlash, Experimental Defintions, and a Drive By Wire Intro

  6. #350
    Pro Manscaper Mikie13's Avatar
    Join Date
    Oct 2006
    Location
    Palmyra, NJ
    Posts
    21,190
    Stan! What's good buddy???

    Damn...all this time I had no idea that's what PPG stood for
    The Hawk-Eye Alliance #90|The Blobeye Syndicate #0|The Stink-Eye Mob #0|N.E.R.D. Founding Member & #3
    2012 Lightning Red WRX Sedan
    ProcessWest TMIC Cobb SF Intake w/airbox Invidia Catless Downpipe Invidia Q300 Catback Kartboy Short Shifter
    OpenSource tuned by: Matty @ WTF Tuning

  7. #351
    Registered User Heide264's Avatar
    Join Date
    May 2010
    Location
    Pittsburgh, PA
    Posts
    4,226
    I Support ClubWRX
    Quote Originally Posted by Mikie13 View Post
    all this time I had no idea that's what PPG stood for
    +1
    Quote Originally Posted by Trainrex
    He was throwing balloons filled with sulfuric acid and shrapnel at the swat team. They finally had to take him down with rubber bullets.
    2011 STi Build Log
    -Part 1 - Reading, Data Logging, and Analyzing Data
    -Part 2 - Turbocharger 101 & Basic Boost Control
    -Part 3 - EcuFlash, Experimental Defintions, and a Drive By Wire Intro

  8. #352
    Registered User Hold_Fast's Avatar
    Join Date
    Mar 2008
    Location
    Philly Burbs
    Posts
    1,450
    How you guys doing? Long time no chat! Have I missed any meets??

    And yes, I too had no idea until I looked at the website.
    ~Stan
    '04 WRB WRX Wagon (Build) - Hard Parked, AutoX Toy
    '08 WRX ~ Daily Beaten ~ '86 BMW 325es ~ "The Chump"

    "I was raised knowing there is a replacement for displacement, it's called engineering."

  9. #353
    Registered User Heide264's Avatar
    Join Date
    May 2010
    Location
    Pittsburgh, PA
    Posts
    4,226
    I Support ClubWRX
    Quote Originally Posted by Hold_Fast View Post
    How you guys doing? Long time no chat! Have I missed any meets??

    And yes, I too had no idea until I looked at the website.
    I'll give you some meat!

    ...Not bad. I'm still not updating my build log... because lazy. I've left the suby on the back burner for now until it's paid off.
    Quote Originally Posted by Trainrex
    He was throwing balloons filled with sulfuric acid and shrapnel at the swat team. They finally had to take him down with rubber bullets.
    2011 STi Build Log
    -Part 1 - Reading, Data Logging, and Analyzing Data
    -Part 2 - Turbocharger 101 & Basic Boost Control
    -Part 3 - EcuFlash, Experimental Defintions, and a Drive By Wire Intro

  10. #354
    Pro Manscaper Mikie13's Avatar
    Join Date
    Oct 2006
    Location
    Palmyra, NJ
    Posts
    21,190
    Quote Originally Posted by Hold_Fast View Post
    How you guys doing? Long time no chat! Have I missed any meets??

    And yes, I too had no idea until I looked at the website.
    Doing alright...and unfortunately, there hasn't been much I know about on the meat front.

    You on Facebook??
    The Hawk-Eye Alliance #90|The Blobeye Syndicate #0|The Stink-Eye Mob #0|N.E.R.D. Founding Member & #3
    2012 Lightning Red WRX Sedan
    ProcessWest TMIC Cobb SF Intake w/airbox Invidia Catless Downpipe Invidia Q300 Catback Kartboy Short Shifter
    OpenSource tuned by: Matty @ WTF Tuning

  11. #355
    Registered User Hold_Fast's Avatar
    Join Date
    Mar 2008
    Location
    Philly Burbs
    Posts
    1,450
    Quote Originally Posted by Heide264 View Post
    I'll give you some meat!

    ...Not bad. I'm still not updating my build log... because lazy. I've left the suby on the back burner for now until it's paid off.


    I know the lazy feels. It's cold in the garage now. Mainly because I was too lazy to get the ceiling up. Can't say I blame you for waiting to pay it off, got anything good in store after that?

    Quote Originally Posted by Mikie13 View Post
    Doing alright...and unfortunately, there hasn't been much I know about on the meat front.

    You on Facebook??
    That is unfortunate. There should be some winter meat, I haven't been to Victory in a little while.

    I do Facebook. I'll PM you my ****.
    ~Stan
    '04 WRB WRX Wagon (Build) - Hard Parked, AutoX Toy
    '08 WRX ~ Daily Beaten ~ '86 BMW 325es ~ "The Chump"

    "I was raised knowing there is a replacement for displacement, it's called engineering."

  12. #356
    Registered User Heide264's Avatar
    Join Date
    May 2010
    Location
    Pittsburgh, PA
    Posts
    4,226
    I Support ClubWRX
    Quote Originally Posted by Hold_Fast View Post
    It's cold in the garage now. Mainly because I was too lazy to get the ceiling up. Can't say I blame you for waiting to pay it off, got anything good in store after that?
    I hear ya. I have an old crappy truck that doesn't come close to fitting in my garage. Hence... I can't really work on it a lot of the time.

    As far as future plans for the STi, it'll be a bit. I want to try out a A/W IC that I plan to build on the truck first due to the easier space constraints and so I can apply anything I've learned to the STi. After that (or most likely, during that) there will be some ID1000s and possibly a smaller rotated setup or borgwarner turbo kit. I'll save up for some coils once the struts go.
    Quote Originally Posted by Trainrex
    He was throwing balloons filled with sulfuric acid and shrapnel at the swat team. They finally had to take him down with rubber bullets.
    2011 STi Build Log
    -Part 1 - Reading, Data Logging, and Analyzing Data
    -Part 2 - Turbocharger 101 & Basic Boost Control
    -Part 3 - EcuFlash, Experimental Defintions, and a Drive By Wire Intro

  13. #357
    Registered User Hold_Fast's Avatar
    Join Date
    Mar 2008
    Location
    Philly Burbs
    Posts
    1,450
    Very cool. I'll be interested to see what you come up with for the A/W IC. I have my eye on a BW turbo kit as well. Hopefully getting some of the details finalized on that soon.

    As for the car, I picked up a Spearco TMIC for a damn good price. So that will help support the bigger turbo kit in the near future. I also revamped the fuel system, since my push lock hoses weren't in the greatest shape. Picked up a kit the Flat 4 Motorsport offers, putting the pieces together now. Just need to make up a bracket to hold the FPR and order some shorter hoses to satisfy my OCD. Pics once I wrap everything up!
    ~Stan
    '04 WRB WRX Wagon (Build) - Hard Parked, AutoX Toy
    '08 WRX ~ Daily Beaten ~ '86 BMW 325es ~ "The Chump"

    "I was raised knowing there is a replacement for displacement, it's called engineering."

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.
If you do not want to register, fill this field only and the name will be used as user name for your post.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself. We strongly suggest that you stay away from using aol, yahoo, msn, and hotmail accounts. Sometimes the mail server blocks the emails from our server. As a result you will not receive any notifications including the confirmation email.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.


Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •